Satisfy and standardize all of your compliance training needs without
sacrificing valuable time and money. All courses will come with a
printable certificate upon successful completion. We can also custom
design your course with site-specific training information or set you up
with our Learning Management System allowing you to register and track
your employees' training. For OSHA Outreach training please visit our
OSHA 10 or OSHA 30 page.
COURSE DESCRIPTION: Satisfy and standardize all of your compliance training needs without sacrificing valuable time and money. All courses will come with a printable certificate upon successful completion. We can also custom design your course with site-specific training information or set you up with our Learning Management System allowing you to register and track your employees' training. For OSHA Outreach training please visit ourOSHA 10 or OSHA 30 page.
This course is intended for workers who want to learn more about cranes, derricks, hoists, elevators, and/or conveyors. Topics include cranes & derricks, helicopters, base-mounted drum hoists, overhead hoists, conveyors, and aerial lifts, This course covers the topics included in OSHA 29 CFR 1926.55 Subpart N.
This course provides an overview of basic electrical safety for individuals with little or limited training or familiarity with electrical hazards and is designed for any worker who may use extension cords, electric tools, etc. This course covers the topics included in OSHA 29 CFR 1910.301-399 Subpart S
Cave-ins are considered the most dangerous trench and excavation hazard. In addition, other potentially fatal hazards also exist in excavations, such as asphyxiation due to lack of oxygen in a confined space, inhalation of toxic fumes, drowning, falls, water accumulation, etc. The OSHA standards intend to protect workers in trenches and excavations. This course gives you a basic understanding of how to work safely in excavations and what important points are required to consider when working in
This course gives you a basic understanding about OSHA’s role in prevention and elimination of work-related illnesses and injuries. The OSHA standard identifies areas or activities where fall protection is needed. It clarifies what an employer must do to provide fall protection for employees, such as identifying and evaluating fall hazards and providing training. Under the standard, employers are able to select fall protection measures compatible with the type of work being performed.
This course has been designed to deliver firsthand information about fires and fire protection measures. After completing this course, you will be able to identify different types of fires and how safety measures can be taken to avoid a disastrous situation. We will also discuss the different types of fire extinguishers in use and discover how careful planning and precautionary measures can be taken to save lives and property. This course is intended for the general audience. For more informati
This course is designed for those who want to learn about recognition, avoidance and prevention of unsafe conditions in regulated employments. Topics include definitions, recognition of unsafe conditions, avoidance of unsafe conditions, and prevention of unsafe conditions. This course focuses on the topics covered in OSHA 29 CFR 1926.20 Subpart C
This course gives you a basic understanding about OSHA’s role in prevention and elimination of work-related illnesses and injuries. Hand and power tools are a part of our everyday lives and help us to easily perform tasks that otherwise would be difficult or impossible. However, these simple tools can be hazardous, and have the potential for causing severe injuries when used or maintained improperly. Special attention toward hand and power tool safety is necessary in order to reduce or eliminate
This course attempts to provide a general overview of the safety measures that are required when working on a scaffold. The course begins with an introduction into the various types of scaffolds, and goes onto to outline the OSHA safety requirements and safety measure that can be taken to ensure that employees working on scaffolds are at little risk of injury or death.
This course gives you a basic understanding of OSHA standards and its role in the prevention and elimination of work-related injuries and fatalities due to stairways and ladders at workplaces.
This course is designed for construction workers who want to learn about precautions and dangers that come from concrete and masonry projects. Topics include general requirements, cast-in-place concrete, and masonry construction. This course covers the topics included in OSHA 29 CFR 1926.7 Subpart Q.
This course encapsulates the safety regulation of the workers working in permit required confined spaces. It instructs about the hazards that may occur during the work in confined spaces.
This course is intended for workers who want to learn more about cranes, derricks, hoists, elevators, and/or conveyors. Topics include cranes & derricks, helicopters, base-mounted drum hoists, overhead hoists, conveyors, and aerial lifts, This course covers the topics included in OSHA 29 CFR 1926.55 Subpart N
This course is intended for workers who want to learn more about cranes, derricks, hoists, elevators, and/or conveyors. Topics include cranes & derricks, helicopters, base-mounted drum hoists, overhead hoists, conveyors, and aerial lifts, This course covers the topics included in OSHA 29 CFR 1926.55 Subpart N.
This course is designed for demolition contractors. Topics include preparatory operations, engineering survey, utility location, medical services & first aid, police & fire contact, fire prevention & protection, special structures, concrete structures, safe blasting procedures, transportation of explosives, storage of explosives, and procedures after blasting. This course covers the topics included in OSHA 29 CFR 1926.7 Subpart T.
1
$20
Driver Safety Course for Cars, Vans & Small Trucks
This course is made for drivers to improve their driving skills and learn something new. Death, injuries, and property damage in the U.S. must be reduced. It is extremely important to the citizens of this country to identify and implement all reasonable means to reduce human suffering and property loss that result from vehicle crashes. The attitudes and skills of drivers must be improved, and through effective driving safety programs, this can be accomplished.
This course is made for drivers to improve their driving skills and learn something new about how large Trucks and Buses can interact on our roadways. The course is specifically designed for professional drivers of large commercial vehicles. Topics covered include Space Management, Passing and Lane Changing, Drug and Alcohol Effects on Traffic Safety, Trip Inspections, and more. This program will help professionals improve their skills and enhance their training to make them sharper, more aware
This course provides an overview of basic electrical safety for individuals with little or limited training or familiarity with electrical hazards and is designed for any worker who may use extension cords, electric tools, etc. This course covers the topics included in OSHA 29 CFR 1910.301-399 Subpart S
Cave-ins are considered the most dangerous trench and excavation hazard. In addition, other potentially fatal hazards also exist in excavations, such as asphyxiation due to lack of oxygen in a confined space, inhalation of toxic fumes, drowning, falls, water accumulation, etc. The OSHA standards intend to protect workers in trenches and excavations. This course gives you a basic understanding of how to work safely in excavations and what important points are required to consider when working in
This course gives you a basic understanding about OSHA’s role in prevention and elimination of work-related illnesses and injuries. The OSHA standard identifies areas or activities where fall protection is needed. It clarifies what an employer must do to provide fall protection for employees, such as identifying and evaluating fall hazards and providing training. Under the standard, employers are able to select fall protection measures compatible with the type of work being performed.
This course has been designed to deliver firsthand information about fires and fire protection measures. After completing this course, you will be able to identify different types of fires and how safety measures can be taken to avoid a disastrous situation. We will also discuss the different types of fire extinguishers in use and discover how careful planning and precautionary measures can be taken to save lives and property. This course is intended for the general audience. For more informati
This course is designed for those who want to learn about recognition, avoidance and prevention of unsafe conditions in regulated employments. Topics include definitions, recognition of unsafe conditions, avoidance of unsafe conditions, and prevention of unsafe conditions. This course focuses on the topics covered in OSHA 29 CFR 1926.20 Subpart C
This course gives you a basic understanding about OSHA’s role in prevention and elimination of work-related illnesses and injuries. Hand and power tools are a part of our everyday lives and help us to easily perform tasks that otherwise would be difficult or impossible. However, these simple tools can be hazardous, and have the potential for causing severe injuries when used or maintained improperly. Special attention toward hand and power tool safety is necessary in order to reduce or eliminate
This course gives a basic overview of OSHA, OSH act, and OSHA’s role in prevention and elimination of work-related illnesses and injuries. It includes information about employer and employee rights and responsibilities, and a very brief look at the inspection process, reporting and recordkeeping. This course will prove beneficial for those who are directly or indirectly involved with OSHA and OSH Act
This course introduces the hazards that are involved in the handling and storage of materials. Different methods of handling and storage are discussed, the hazards they pose to workers and the methods by which these hazards can be reduced or eliminated from the workplace
This course is intended for workers who want to know about motor vehicles, mechanized equipment, marine operations, rollover protective structures, overhead protection, signs, signals, and/or barricades. Topics include motor vehicles, mechanized equipment, marine operations, rollover protective structures, overhead protection, signs, signals, and/or barricades. This course covers the topics included in OSHA 29 CFR 1926 Subparts O,W,G
This course is designed for people working in the construction industry who are exposed to health hazards and chemicals during the course of their work. Topics include definitions, hazard communication standard, asbestos standards, MDA, lead, worker protection programs, process safety management of highly hazardous chemicals, and cadmium. This course focuses on the topics covered in OSHA 29 CFR 1926 Subpart D.
This course is designed for those in the construction industry who follow state OSHA plans and federal plans. This course discusses the 29 CFR 1926.20, General Safety and Health Provisions, 29 CFR 1926.21, Safety Training and Education, 29 CFR 1926.23, First Aid and Medical Attention, and 29 CFR 1904.2, Recordkeeping Requirements.
It is the employers’ responsibility to assess the workplace hazards, and if they are present or are likely to be present, and work practice controls alone are not sufficient, then the employer must provide personal protective equipment to the exposed employees. This course gives you a basic understanding about OSHA’s role in prevention and elimination of work-related casualties and fatalities, which can be protected through proper personal protective equipment (PPE).
It is the employers’ responsibility to assess the workplace hazards, and if they are present or are likely to be present, and work practice controls alone are not sufficient, then the employer must provide personal protective equipment to the exposed employees. This course gives you a basic understanding about OSHA’s role in prevention and elimination of work-related casualties and fatalities, which can be protected through proper personal protective equipment (PPE).
This course is designed to assist employers in identifying and fulfilling their responsibilities for posting certain records, maintaining records of illnesses and injuries, and reporting specific cases to OSHA. Students who successfully complete this course will be able to identify the OSHA requirements for recordkeeping.
This course provides a general overview of the safety measures that are required when working on a scaffold. The course begins with an introduction into the various types of scaffolds, and goes onto to outline the OSHA safety requirements and safety measure that can be taken to ensure that employees working on scaffolds are at little risk of injury or death.
This course presents material on the safe operation of powered industrial trucks, also known as fork trucks, lift trucks or forklifts. Among material handling equipment, none are as common as the forklift.
This course is designed for construction workers who want to learn about precautions and dangers that come from concrete and masonry projects. Topics include general requirements, cast-in-place concrete, and masonry construction. This course covers the topics included in OSHA 29 CFR 1926.7 Subpart Q.
This course is intended for workers who want to learn more about cranes, derricks, hoists, elevators, and/or conveyors. Topics include cranes & derricks, helicopters, base-mounted drum hoists, overhead hoists, conveyors, and aerial lifts, This course covers the topics included in OSHA 29 CFR 1926.55 Subpart N.
This course provides an overview of basic electrical safety for individuals with little or limited training or familiarity with electrical hazards and is designed for any worker who may use extension cords, electric tools, etc. This course covers the topics included in OSHA 29 CFR 1910.301-399 Subpart S.
Cave-ins are considered the most dangerous trench and excavation hazard. In addition, other potentially fatal hazards also exist in excavations, such as asphyxiation due to lack of oxygen in a confined space, inhalation of toxic fumes, drowning, falls, water accumulation, etc. The OSHA standards intend to protect workers in trenches and excavations. This course gives you a basic understanding of how to work safely in excavations and what important points are required to consider when working in
This course gives you a basic understanding about OSHA’s role in prevention and elimination of work-related illnesses and injuries. The OSHA standard identifies areas or activities where fall protection is needed. It clarifies what an employer must do to provide fall protection for employees, such as identifying and evaluating fall hazards and providing training. Under the standard, employers are able to select fall protection measures compatible with the type of work being performed.
This course provides an overview of the OSHA standard for General Safety and Health Provisions (OSHA 29 CFR 1926 Subpt C). Topics covered in this course include safety training and education, first aid, fire protection, as well as employee emergency action plans
This course gives you a basic understanding about OSHA’s role in prevention and elimination of work-related illnesses and injuries. Hand and power tools are a part of our everyday lives and help us to easily perform tasks that otherwise would be difficult or impossible. However, these simple tools can be hazardous, and have the potential for causing severe injuries when used or maintained improperly. Special attention toward hand and power tool safety is necessary in order to reduce or eliminate
This course gives a basic overview of OSHA, OSH act, and OSHA’s role in prevention and elimination of work-related illnesses and injuries. It includes information about employer and employee rights and responsibilities, and a very brief look at the inspection process, reporting and recordkeeping. This course will prove beneficial for those who are directly or indirectly involved with OSHA and OSH Act.
This course attempts to provide a general overview of the safety measures that are required when working on a scaffold. The course begins with an introduction into the various types of scaffolds, and goes onto to outline the OSHA safety requirements and safety measure that can be taken to ensure that employees working on scaffolds are at little risk of injury or death.
This course gives you a basic understanding of OSHA standards and its role in the prevention and elimination of work-related injuries and fatalities due to stairways and ladders at workplaces.
This course has been designed to deliver firsthand information about fires and fire protection measures. After completing this course, you will be able to identify different types of fires and how safety measures can be taken to avoid a disastrous situation. We will also discuss the different types of fire extinguishers in use and discover how careful planning and precautionary measures can be taken to save lives and property. This course is intended for the general audience. For more informati
This course gives you a basic understanding of OSHA standards and its role in the prevention and elimination of work-related injuries and fatalities due to stairways and ladders at workplaces.
This course attempts to discuss the two most common types of welding and cutting (gas and arc), the danger that are involved in working with them and the safety measure that can be undertaken to minimize and prevent the occurrence of their associated hazards. The course goes on to study fire prevention techniques and the danger of preservative coatings when welding or cutting.
